Benutzer-Werkzeuge

Webseiten-Werkzeuge


einplatine:cubietruck

Dies ist eine alte Version des Dokuments!


Das Cubietruck (Cubieboard 3) ist das dritte Board des Cubieteams. Es handelt sich um ein neues PCB Modell mit einem Allwinner A20 Chip, der auch beim Cubieboard 2 verwendet wurde. Gegenüber dem Cubieboard 2 kommt es aber mit ein paar speziellen Features wie einem 2 GB Speicher, einer onboard VGA-Display-Schnittstelle, Wifi und Bluethooth onboard, einer SPDIF-Audio-Schnittstelle, Unterstützung von LiPo-Batterien, RTC und 1000M NIC.

89,00 EUR

Features:

  • Allwinner Tech A20 SOC
  • SATA supported
  • 54 extended pins
  • Built-in HDMI/ VGA display interface
  • Built-in WIFI+BT module
  • 2GB DDR3 RAM
  • Built-in IR receiver
  • SPDIF audio interface
  • Specifications:
  • Allwinner Tech SOC A20 ARM® Cortex™-A7 Dual-Core ARM® Mali400 MP2 Complies with OpenGL ES 2.0/1.1
  • 2GB DDR3@480MHz
  • HDMI&VGA 1080P display output on-board
  • 10M/100M/1G Ethernet
  • WIFI + BT wireless connection with antenna on-board
  • SATA 2.0 interface support 2.5’ HDD (for 3.5’ HDD, only need another 12V power input)
  • Storage solution NAND + MicroSD
  • 2 x USB HOST, 1 x OTG, 1 x SPDIF, 1 x IR, 4 x LEDs, 1 x Headphone, 3 x Keys
  • Power DC5V@2.5A with HDD support Li-battery & RTC
  • 54 extended pins including I2S, I2C, SPI, CVBS, LRADC x2,UART, PS2, PWM x2, TS/CSI, IRDA, LINEIN&FMIN&MICIN, TVIN x4 with 2.0 pitch connectors
  • PCB size 11cm *8cm*1.4mm

Lieferumfang:

  • Cubietruck main board x1
  • SATA 2.0 cable x1
  • Mini USB to OTG x1
  • Mini USB cable x1
  • USB to 1.7 mm DC jack cable x1
  • Acrylic shell x1
  • Ultrathin Heat Sink x1
einplatine/cubietruck.1390151919.txt.gz · Zuletzt geändert: 2020/03/02 09:54 (Externe Bearbeitung)