Benutzer-Werkzeuge

Webseiten-Werkzeuge


einplatine:udoo

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen Revision Vorhergehende Überarbeitung
Nächste Überarbeitung
Vorhergehende Überarbeitung
einplatine:udoo [2014/01/19 18:35]
koneca gelöscht
einplatine:udoo [2020/03/02 09:54] (aktuell)
Zeile 1: Zeile 1:
-UDOO is a mini PC that can be used both with Android and Linux OS, with an embedded Arduino-compatible board. It is a powerful prototyping board for software development and design; it’s easy to use and allows developing projects with minimum knowledge of hardware. UDOO merges different computing worlds together: each one has its proper strengths and weak points, but all of them are useful in todays life for educational purposes as well as Do-It-Yourself (DIY) and quick prototyping. UDOO is an open hardware, low-cost platform equipped with an ARM i.MX6 Freescale processor, and an Arduino Due compatible section based on ATMEL SAM3X8E ARM processor, all this available on the same board! 
  
-==== UDOO goals====+{{:einplatine:​s975-b000-2100-c2_3.jpg?​300|}}
  
 +**84,50 EUR**
  
-Develop an innovative product for a growing market +**Features**
-Give a new vision to the educational framework, with the idea of training up a new generation of engineers, designers and software developers skilled in digital technology: physical computing, multi-media arts, interactive arts, IoT... +
-Give a boost to the DIY world +
-Offer a low cost embedded platform for interactive arts with powerful tools: Processing, OpenCV, PureData, openFramework +
-Provide companies with a great tool for fast prototyping +
-Specifications+
  
-UDOO retail line up consists of three models, sharing most of the features and different only for connectivity and i.MX6 processor used. All three models feature an embedded Arduino compatible section based on Arduino Due schematic. UDOO’s dimensions are: 4.33 inch x 3.35 inch (11 cm x 8.5 cm). +  ​CPU Freescale i.MX 6 ARM Cortex-A9 ​Dual core 1GHz 
-Warning: The UDOO I/O pins are 3.3V compliant. Higher voltages (like 5V) would damage the board. +  * GPU Vivante GC 880 + Vivante GC 320 
-Learn more about wrong uses that invalidate the warranty. +  * Integrated accelerators ​for 2D, OpenGL® ES2.0 3D and OpenVG™
-Micro SD Card (to be verified) +
- +
-Physical Type: microSD +
-Maximum Capacity: ​ ?? GB +
-Transfer rate read:  ?? MB/s +
-Transfer rate write: ​ ?? MB/s +
-Recommended SD Class: ?? +
-See http://​en.wikipedia.org/​wiki/​Secure_Digital#​Speed_class_rating for more information. +
-GPIO features +
- +
-The retail version of UDOO, compared to the first beta version releases has these additional features: +
-S/PDIF digital audio in & out through pin headers; +
-I2S/​AC97/​SSI digital audio multiplexer through pin headers; +
-FlexCAN (Flexible Controller Area Network) through pin headers, it is possible to switch this function’s management between i.MX6 processor and SAM3X8E processor;​ +
-External SD card support through pins header: plug an external controller for an additional SD card slot or for an eMMC module. +
-UDOO Quad +
- +
-  ​* Freescale i.MX6Quad, 4 x ARM® Cortex-A9 core 1GHz with ARMv7A instruction set +
-  * GPU Vivante GC 2000 for 3D + Vivante GC 355 for 2D (vector graphics) ​+ Vivante GC 320 for 2D (composition)+
   * Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino Due)   * Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino Due)
   * RAM DDR3 1GB   * RAM DDR3 1GB
-  * 76 fully available GPIO with Arduino compatible R3 1.0 pinout+  * 76 fully available GPIO: 62 digital + 14 digital/​analog 
 +  * Arduino-compatible R3 1.0 pinout
   * HDMI and LVDS + Touch   * HDMI and LVDS + Touch
-  * 2 Micro USB (1 OTG) +  * 2 Micro USB (1 OTG type a+b
-  * 2 USB 2.0 type A and 1 USB 2.0 internal pin header ​(requires ​adapter cable+  * 2 USB type A (x2) and 1 USB connector ​(requires ​a specific wire
-  * Analog Audio and Mic jacks+  * Analog Audio and Mic
   * CSI Camera Connection   * CSI Camera Connection
   * on board Micro SD card reader (boot device)   * on board Micro SD card reader (boot device)
Zeile 45: Zeile 22:
   * Ethernet RJ45 (10/​100/​1000 MBit)   * Ethernet RJ45 (10/​100/​1000 MBit)
   * WiFi Module   * WiFi Module
-  * SATA connector with power header 
einplatine/udoo.txt · Zuletzt geändert: 2020/03/02 09:54 (Externe Bearbeitung)